Tips for Garage Door Repair – Replacing Glass

If you have kids, you will be realized that sooner or later you will have to be thinking about changing the broken glass of the garage door. Luckily, changing the broken glass in the wooden frame of the garage door is quite simple. You can perform this task very fast. There is some important consideration to remember though. First of all, you will have to make sure to wear gloves at all times so that you won’t be injured. Click Here https://newtowngaragedoorrepairs.com/ to get more details about replacing the glass windows.

Start from the outside: Startfromremoving the loose of broken pieces of glass from outside the garage. To get rid of all the broken pieces, you should use a putty knife to remove the glazing substances around the edges of the window. A small chisel can also be used for this objective. If these tricks do not work, try it with the help of a blow drier or a heat gun. If none of the techniques work, you can apply lubricant to soften the glazing.

Remove the glass carefully: Once the glazing has softened, you will have to remove all the pieces of glass. You need to make sure that you have removed all the remaining putty and paint from the window’s frame. Clean the surface properly otherwise the new material will not adjust to the surface. In case, there are any wood pieces left, you should trim them against the substances.

Measure the size: You should measure the height and the width of the windows and their opening diameter. It should be subtracted 0.125 inches from each side. The next step is to measure the thickness of the glass. Once you have taken all the measurements, just head to the glass store or any reputed home improvement store to buy a new pane.

Frame the glass: Make sure that the primer you applied to the surface has been dried properly before you start working. You may use a glazing compound to create a thin rope and press it to make a solid frame. Place a new pane into the right position and gently press around the edges. This way you will have to make sure that the glass is properly stuck to the glazing. You need to apply some pressure with the help of a putty knife. Don’t impose too much force so that the glass won’t break.

Finishing touch: At the end, apply some more glazing around the edges of the window. To make the windows more stylish and appealing, you should smooth the edges using a putty knife. It takes about a week for the putty to dry completely. After doing this, you should prime the putty and the rest of the wood. Paint the entire components to match it with a garage door.

Conducting this type of garage door repair is simple or rocket science but keep in mind that having broken glass on your garage door can be dangerous. It should be your first priority to take care of the problem as soon as possible. The good thing about this type of project is that it will provide you visible and long-term results, and you will feel like a pro if you have never performed like this before. It will be natural.